Edward full arm guard Discontinued

149,90 €*

Tiempo de entrega 2-5 días

Color
Número de producto: 970092
Nuestras ventajas
  • Envío gratuito a partir de 150€ (ES+)
  • Más de 25 años de experiencia
  • Elija entre más de 5.000 artículos
Información sobre el producto "Edward full arm guard Discontinued"

Discontinued, only while stocks last   

The full armguard from the "Edward" series is big enough to be worn on top of a gambeson and even the padded jacket with an additional chain mail.
The upper part is being fixed to the spaulders on the inner side. The arm guard itself is then fitted to the wearers arm by the straps and buckles on upper arm, elbow and forearm.
The inner elbow is being protected by the "shell", as the plate piece on the outside of the guard is called. The forearm is closed inside a two-piece pipe - you will not need any bracers in addition to this piece here.
Material: 1.2mm steel
Colours: blank, browned with blank edges

lenght54
upper width48
lower width33
All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.

Los clientes también vieron

Leopold upper thigh padding
This thigh protection was made for comfort reasons. It allows full leg guards to be worn for a longer period of time.They are attached with a seperate belt on your hip.UnisizeMaterial: canvas, polyester

49,90 €*
Edward full arm guard Discontinued
Discontinued, only while stocks last   The full armguard from the "Edward" series is big enough to be worn on top of a gambeson and even the padded jacket with an additional chain mail.The upper part is being fixed to the spaulders on the inner side. The arm guard itself is then fitted to the wearers arm by the straps and buckles on upper arm, elbow and forearm.The inner elbow is being protected by the "shell", as the plate piece on the outside of the guard is called. The forearm is closed inside a two-piece pipe - you will not need any bracers in addition to this piece here.Material: 1.2mm steelColours: blank, browned with blank edges lenght54upper width48lower width33 All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.

129,90 €*
Edward greaves Discontinued
Discontinued, only while stocks last   These greaves were built with a bigger inner diameter to be worn by bigger heroes and on top of padded leg protection. They have a beading surrounding the edge, just as well as rivets for decoaration. The foot part is cut out lower, so they can rest comfortably on the foot and protect the ankles. The swung shape of the greaves makes them look even more exclusive. They are being closed with two buckle-straps. Material: 1,2mm steel Colour: blank, browned with blank edges length34,5 upper width27lower width24 All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.

Variantes de 69,90 €*
79,90 €*

Clientes que también compraron

Solo 3 disponible
Edward full legguard browned with blank edges Discontinued
Discontinued, only while stocks last   The "Edward" series full leg guards was built large enough even for bigger heroes. This way it can be worn even on top of padded thigh guards and completes many full plate armours. It is being tied to the wearer by using a belt for the two laces and attached to the leg and knee with buckle-straps. The knees outer side is closed by a shell (knee-plate), so that blows and strikes can not cut the important parts. The leg guards ends just below the knee and can therefore be worn with greaves or seperatly: both ways are possible and depend on the wearers' decision. Material: 1.2mm steel Middle of knee to outer edge of thigh52.5Middle of knee to inner edge of thigh34Metal width at thigh33Middle of knee to lower edge middle22Metal width at bottom22Total lengthca. 73 All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.

129,90 €*
Edward greaves Discontinued
Discontinued, only while stocks last   These greaves were built with a bigger inner diameter to be worn by bigger heroes and on top of padded leg protection. They have a beading surrounding the edge, just as well as rivets for decoaration. The foot part is cut out lower, so they can rest comfortably on the foot and protect the ankles. The swung shape of the greaves makes them look even more exclusive. They are being closed with two buckle-straps. Material: 1,2mm steel Colour: blank, browned with blank edges length34,5 upper width27lower width24 All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.

Variantes de 69,90 €*
79,90 €*
Solo 5 disponible
Edward helmet Discontinued
Discontinued, only while stocks last   The matching helmet to our armor series Edward. Its design is based on historical great helmets, but with more dynamic shaped eye slits. Like all pieces from this series the offset beading and the decorative rivets make it a real eye-catcher.The helmet has a circumference of 60cm to 62cm, so it is made for larger heads.Material: Steel 1,2mmColour: blank, browned with blank edges

Variantes de 99,90 €*
109,90 €*